Entries tagged [v2]
Maelstrom's Edge V2: Shooting Modes
Posted on Tuesday May 24, 2022 at 05:00pm in General
On the battlefields of the Edge, troops fight with a wide array of different weapons. In Maelstrom's Edge V2, we've changed the way shooting works to streamline the process, and to give your units some more tactical choices during your games. Read on for details!
Shooting in Maelstrom's Edge is, rather unsurprisingly, intended primarily to destroy enemy units, but there are now some other useful tricks available to you.
During their activation, a unit can choose a 'Fire' action, which lets them make a regular attack with their ranged weapons. After selecting a target and checking line of sight and range (see the previous article on Line of Sight here!), each model rolls a number of dice equal to the SHO (Shots) characteristic of their weapon, aiming to equal or exceed the EVS (Evasion) characteristic of the target. Dice rolling a 6 are 'Critical Hits' and can confer some additional bonuses on the shot.
Models can then use their SKL (Skill) characteristic to modify these rolls, with each point of SKL allowing a die score to be increased by 1.
Here's an example:
Danielle’s unit of Spider Drones is performing a Fire action and she has nominated Matt’s unit of Karist Troopers as their target. Danielle first checks that the Troopers are within line of sight of her squad leader (the Apprentice Handler) and that they are only 15” away, well within the standard 18” range of her Drone Class Machine Guns and the 24” range of her Apprentice Handler’s Maglock Dominator Pistol.
Drone Class Machine Guns are SHO 2, and therefore she will roll 2 dice to hit for each model in her unit, 8 (white) dice in total. Whereas the Maglock Dominator Pistol is only SHO 1, and therefore only adds 1 more (red) die. The targeted Troopers have EVS 4, which means she must roll 4+ to score hits. For the 8 Machine Gun shots she rolls: ‘1’, ‘1’, ‘2’, ‘3’, ‘3’, ‘4’, ‘5’ and ‘6’ and for the Dominator Pistol, she rolls a ‘6’. So 3 hits for the Machine Guns and 1 for the Dominator Pistol. However, Spider Drones have SKL 2, which means Danielle has 2 dice flips available to her. She decides the best way to utilize them in this situation is to flip the two rolls of ‘3’ up to ‘4’s, thereby giving her a new total of 5 Machine Gun hits.
The target unit will then roll to defend against the incoming fire, rolling the successful hits and attempting to equal or exceed the PEN (Penetration) value of the shot. In a similar fashion to the attack rolls, the defender can use their unit's AV (Armor Value) to modify these rolls.
Any hits that are not successfully blocked result in a casualty. The unit will also gain suppression, going up one level due to being hit by enemy fire, and another if they suffered any casualties. (For more detail on suppression, check out the article here.)
Suppressive Fire
In Maelstrom's Edge V2, suppression has a major effect on how units function, as it impacts their ability to attack enemies, and also how well they can utilise cover. Players can capitalise on this by weakening strong or heavily fortified units by chipping away at them with multiple attacks and slowly adding suppression levels, but we wanted to give players a way to use this more effectively.
As a result, instead of making a regular shooting attack, a player can elect to have their unit make a 'Suppressive Fire' action. This works differently to a regular attack. Instead of using the weapon's SHO value and the unit's SKL, each model in the firing unit rolls a die in an attempt to equal or beat the SUP (Suppression) characteristic of their weapon. For each successful roll, the target must make a WP (Willpower) test. They will gain a suppression level automatically for being the target of suppressive fire, and another level for each failed WP test.
In this way, a shrewd attacker can potentially force a large amount of suppression onto a unit in a single action.
A note on weapon ranges on Maelstrom's Edge: Weapons have a listed RNG (Range) characteristic, which defines the maximum effective range of that weapon. Projectiles don't tend to just stop at an arbitrary range, however, and in general actual maximum weapon ranges would in most cases fall way outside the dimensions of a gaming table. As such, most weapons can be fire past their listed RNG, with this being considered a long range shot. Models making long range shots are Wild Firing, which means they count the target as having EVS 6.
The Maelstrom's Edge V2 rulebook is now available! Grab your copy from the Maelstrom's Edge webstore now!
If you have any thoughts on the new rules, pop on over to the Comm Guild Facebook group, or start up a thread in the Maelstrom's Edge section on the Dakka Dakka forums. We welcome any feedback, and would love to hear how everyone's forces stack up in the new rules!
Shooting in Maelstrom's Edge is, rather unsurprisingly, intended primarily to destroy enemy units, but there are now some other useful tricks available to you.
During their activation, a unit can choose a 'Fire' action, which lets them make a regular attack with their ranged weapons. After selecting a target and checking line of sight and range (see the previous article on Line of Sight here!), each model rolls a number of dice equal to the SHO (Shots) characteristic of their weapon, aiming to equal or exceed the EVS (Evasion) characteristic of the target. Dice rolling a 6 are 'Critical Hits' and can confer some additional bonuses on the shot.
Models can then use their SKL (Skill) characteristic to modify these rolls, with each point of SKL allowing a die score to be increased by 1.
Here's an example:
Danielle’s unit of Spider Drones is performing a Fire action and she has nominated Matt’s unit of Karist Troopers as their target. Danielle first checks that the Troopers are within line of sight of her squad leader (the Apprentice Handler) and that they are only 15” away, well within the standard 18” range of her Drone Class Machine Guns and the 24” range of her Apprentice Handler’s Maglock Dominator Pistol.
Drone Class Machine Guns are SHO 2, and therefore she will roll 2 dice to hit for each model in her unit, 8 (white) dice in total. Whereas the Maglock Dominator Pistol is only SHO 1, and therefore only adds 1 more (red) die. The targeted Troopers have EVS 4, which means she must roll 4+ to score hits. For the 8 Machine Gun shots she rolls: ‘1’, ‘1’, ‘2’, ‘3’, ‘3’, ‘4’, ‘5’ and ‘6’ and for the Dominator Pistol, she rolls a ‘6’. So 3 hits for the Machine Guns and 1 for the Dominator Pistol. However, Spider Drones have SKL 2, which means Danielle has 2 dice flips available to her. She decides the best way to utilize them in this situation is to flip the two rolls of ‘3’ up to ‘4’s, thereby giving her a new total of 5 Machine Gun hits.
The target unit will then roll to defend against the incoming fire, rolling the successful hits and attempting to equal or exceed the PEN (Penetration) value of the shot. In a similar fashion to the attack rolls, the defender can use their unit's AV (Armor Value) to modify these rolls.
Any hits that are not successfully blocked result in a casualty. The unit will also gain suppression, going up one level due to being hit by enemy fire, and another if they suffered any casualties. (For more detail on suppression, check out the article here.)
Suppressive Fire
In Maelstrom's Edge V2, suppression has a major effect on how units function, as it impacts their ability to attack enemies, and also how well they can utilise cover. Players can capitalise on this by weakening strong or heavily fortified units by chipping away at them with multiple attacks and slowly adding suppression levels, but we wanted to give players a way to use this more effectively.
As a result, instead of making a regular shooting attack, a player can elect to have their unit make a 'Suppressive Fire' action. This works differently to a regular attack. Instead of using the weapon's SHO value and the unit's SKL, each model in the firing unit rolls a die in an attempt to equal or beat the SUP (Suppression) characteristic of their weapon. For each successful roll, the target must make a WP (Willpower) test. They will gain a suppression level automatically for being the target of suppressive fire, and another level for each failed WP test.
In this way, a shrewd attacker can potentially force a large amount of suppression onto a unit in a single action.
A note on weapon ranges on Maelstrom's Edge: Weapons have a listed RNG (Range) characteristic, which defines the maximum effective range of that weapon. Projectiles don't tend to just stop at an arbitrary range, however, and in general actual maximum weapon ranges would in most cases fall way outside the dimensions of a gaming table. As such, most weapons can be fire past their listed RNG, with this being considered a long range shot. Models making long range shots are Wild Firing, which means they count the target as having EVS 6.
The Maelstrom's Edge V2 rulebook is now available! Grab your copy from the Maelstrom's Edge webstore now!
If you have any thoughts on the new rules, pop on over to the Comm Guild Facebook group, or start up a thread in the Maelstrom's Edge section on the Dakka Dakka forums. We welcome any feedback, and would love to hear how everyone's forces stack up in the new rules!
Tags: v2
Maelstrom's Edge V2 - Suppression Explained
Posted on Tuesday May 10, 2022 at 05:00pm in Gaming
This article is obsolete, and has been replaced with a new version which you can find here!
Tags: v2
Maelstrom's Edge V2 - Line of Sight
Posted on Tuesday Apr 05, 2022 at 05:00pm in Gaming
Over the last little while, we've been running through a series of articles looking at different aspects of the V2 rules for Maelstrom's Edge. This week, we're casting our eyes towards the Line of Sight rules!
In order to shoot at an enemy, a unit generally needs to be able to see it. Maelstrom's Edge uses simple rules to establish whether or not an enemy is a valid target. Read on for details!
CHECKING LINE OF SIGHT
Maelstrom's Edge uses a model's eye view for determining line of sight. This means checking from behind and just above the model to check if they could see their target. If you can see any part of the enemy unit, then you have line of sight to them. For units of more than one model, line of sight is only checked from the squad leader, as they direct the shooting of the rest of the unit. This helps to speed up gameplay - having to check from each individual model in the unit can get a little tedious. If the squad leader can see the enemy, then the whole unit has line of sight.
A Broken Sniper draws a bead on a squad of Epirian SecDef troops.
WIDE OPEN SHOTS
Generally on a battlefield, troops aren't actually just standing around in funky action poses waiting for their turn to move. With this in mind, Maelstrom's Edge assumes that models are making use of whatever cover is around them, and this is factored in to the Skill and Evasion stats that are used to resolve shooting attacks. (Check out the Sample Unit Activation article for more details on how that works!)
Sometimes, though, a unit will be caught completely in the open, and this can give an attacking enemy a boost to their shooting. Attacking units gain a +2 bonus to their Skill for that round of shooting if their target is completely visible, without being even partially obscured by intervening terrain or other models. This Wide Open Shot bonus can be negated by certain unit actions, however - units that are On The Move or Taking Cover will not confer the bonus. (See the Unit Actions article for details on what those actions do for your units!)
A Karist Alessi Novitiate gets a little caught up in the moment and breaks cover.
TAKING COVER
As mentioned above, units are generally assumed to be making use of whatever cover is available as they move. They also have the option of using the Taking Cover status action to maximise this protection by huddling up against obstacles or going prone in more open ground. This doesn't affect line of sight or attack resolution, but does give them a bonus to their defense before rolling for armor. We'll go into this in more detail in a future article.
A Remnant Longshot takes cover on the roof, waiting patiently for a target to present itself.
The Maelstrom's Edge V2 rulebook is now available! Grab your copy from the Maelstrom's Edge webstore now!
If you have any thoughts on the new rules, pop on over to the Comm Guild Facebook group, or start up a thread in the Maelstrom's Edge section on the Dakka Dakka forums. We welcome any feedback, and would love to hear how everyone's forces stack up in the new rules!
In order to shoot at an enemy, a unit generally needs to be able to see it. Maelstrom's Edge uses simple rules to establish whether or not an enemy is a valid target. Read on for details!
CHECKING LINE OF SIGHT
Maelstrom's Edge uses a model's eye view for determining line of sight. This means checking from behind and just above the model to check if they could see their target. If you can see any part of the enemy unit, then you have line of sight to them. For units of more than one model, line of sight is only checked from the squad leader, as they direct the shooting of the rest of the unit. This helps to speed up gameplay - having to check from each individual model in the unit can get a little tedious. If the squad leader can see the enemy, then the whole unit has line of sight.
A Broken Sniper draws a bead on a squad of Epirian SecDef troops.
WIDE OPEN SHOTS
Generally on a battlefield, troops aren't actually just standing around in funky action poses waiting for their turn to move. With this in mind, Maelstrom's Edge assumes that models are making use of whatever cover is around them, and this is factored in to the Skill and Evasion stats that are used to resolve shooting attacks. (Check out the Sample Unit Activation article for more details on how that works!)
Sometimes, though, a unit will be caught completely in the open, and this can give an attacking enemy a boost to their shooting. Attacking units gain a +2 bonus to their Skill for that round of shooting if their target is completely visible, without being even partially obscured by intervening terrain or other models. This Wide Open Shot bonus can be negated by certain unit actions, however - units that are On The Move or Taking Cover will not confer the bonus. (See the Unit Actions article for details on what those actions do for your units!)
A Karist Alessi Novitiate gets a little caught up in the moment and breaks cover.
TAKING COVER
As mentioned above, units are generally assumed to be making use of whatever cover is available as they move. They also have the option of using the Taking Cover status action to maximise this protection by huddling up against obstacles or going prone in more open ground. This doesn't affect line of sight or attack resolution, but does give them a bonus to their defense before rolling for armor. We'll go into this in more detail in a future article.
A Remnant Longshot takes cover on the roof, waiting patiently for a target to present itself.
The Maelstrom's Edge V2 rulebook is now available! Grab your copy from the Maelstrom's Edge webstore now!
If you have any thoughts on the new rules, pop on over to the Comm Guild Facebook group, or start up a thread in the Maelstrom's Edge section on the Dakka Dakka forums. We welcome any feedback, and would love to hear how everyone's forces stack up in the new rules!
Maelstrom's Edge V2 - Updated Imperial Marine rules!
Posted on Tuesday Mar 22, 2022 at 05:00pm in Gaming
- by Iain Wilson
With the V2 rules (which you can grab for free right now in their Beta format!) updating all of the existing factions, it seemed like a good time to revisit my homebrew 'Imperial Marine' faction list, to give those old marines some new tricks to bring to tables on the Edge.
I have fleshed the original units out a little by adding in some extra options here and there, and reworked some rules and equipment to work better within the new rules system. It doesn't include rules for every available model option out there, but should give more than enough variety to put together some reasonably varied forces comprised of whichever suitable power armored panhuman models you may have sitting around.
You can find the new unit sheets as a PDF document in the V2 Trial Rules section of the Maelstrom's Edge website here. Note that these rules are intended as just a fun way to use some of your non-Maelstrom's Edge models in your games. The Imperial Marine faction is not a 'canon' part of the Maelstrom's Edge background, nor are the rules an official part of the game, so you should only use them with your opponent's consent. These rules also aren't as thoroughly tested yet as the other faction rules, so feel free to kick the tyres and get back to me if you find any oddities, or find anything that you think isn't working quite right!
While you're there, get started with the V2 rules by downloading the Beta rulebook from the Trial Rules section of the Maelstrom's Edge website here. The Beta rules documents contain all of the rules for playing V2 games, but keep in mind that these are just 'preview' documents - some rules may be revised based on feedback, and the final layout including background material for the factions and the Maelstrom's Edge universe, artwork and other 'flavor' material is missing.
If you have any thoughts on the Beta rules, pop on over to the Comm Guild Facebook group, or start up a thread in the Maelstrom's Edge section on the Dakka Dakka forums. We welcome any feedback, and would love to hear how everyone's forces stack up in the new rules!
Imperial Marine models shown in this article are from Games Workshop, Anvil Industry and Bluebird Toys.
Maelstrom's Edge V2 - A Sample Unit Activation
Posted on Tuesday Mar 15, 2022 at 05:00pm in Gaming
Hi! You have found your way to an old article that has been replaced due to obsolete information. You can find the new version of this article here!
Maelstrom's Edge V2 - Suppression Markers
Posted on Tuesday Feb 15, 2022 at 06:00pm in Gaming
- by Iain Wilson
The V2 rules for Maelstrom's Edge (which you can download for free in their current Beta format!) make some big changes to the way suppression works. Along with giving suppression a more active and serious impact on how units behave, the way suppression is tracked has changed. In V1, we used 4 sizes of explosion-shaped suppression markers to mark a potentially endless number of suppression points. V2 changes this to having 6 suppression levels, and so we need a different way to mark this on units during the game. Below, I go through a few different options for doing so.
With 6 suppression levels, the most obvious markers to use are six sided dice. Using dice does have its drawbacks, however, the most obvious being that it's easy to accidentally pick them up mid game and use them for other things. So if you go with this option, make sure you use dice of a very different colour and/or size to those you are using for your shooting!
If you would prefer to avoid the 'stray dice' trap, another easy option is to use numbered markers. Blank plastic tokens, cheap poker chips, or circles cut from cardboard or plastic can be numbered from 1 to 6 with paint or a permanent marker and swapped out as needed to track your suppression.
Of course, if you have the V1 suppression markers, it seems a shame to not continue using them! You could use them like the flat tokens above by writing numbers on them, or combine them with the dice method - glue a suppression marker to a spare base or circle of card and then you can tuck a small D6 into one side of the marker. You can also do this without the base, but having it there makes it easier to pick the marker up and move it around with the unit.
Or, because I can't resist finding an overly complex solution to a simple problem, you can go all out and make a numbered dial to glue onto the bottom of the cardboard suppression marker!
The one was made with a spare base sprayed white, with numbers added on with a permanent marker. I drilled a hole in the middle of the base and glued a piece of plastic rod sticking up through it. Onto the bottom of a suppression marker, I glued a circle of foamed PVC with a matching central hole and a cutaway on the edge to show the numbers on the base. With this sitting in place on top of the base, another piece of plastic tube glued over the top of the protruding base rod locks it in place.
With everything glued in place, the marker serves as a handle to turn the dial to show the relevant suppression level through the gap!
The Maelstrom's Edge V2 rulebook is now available! Grab your copy from the Maelstrom's Edge webstore now!
If you have any thoughts on the new rules, pop on over to the Comm Guild Facebook group, or start up a thread in the Maelstrom's Edge section on the Dakka Dakka forums. We welcome any feedback, and would love to hear how everyone's forces stack up in the new rules!
Tags: v2
Maelstrom's Edge V2 Rules - Getting up close and personal!
Posted on Thursday May 16, 2019 at 01:11am in Gaming
We're hard at work on a second edition rulebook for Maelstrom's Edge, and over the coming months will be showcasing changes and refinements, and asking for feedback on different directions for the rules. One of the bigger changes we're implementing involves the number of dice rolled by models in Close Quarters attacks.
In the current Maelstrom's Edge rules, unless you have a melee weapon with a specified SHO value, the number of dice you roll for Close Quarters attacks is determined by a neat little formula that uses the model's EVS, MAS and FOR stats. While this provides some nice granularity, and allows for a large model's CQ ability to be reduced as it takes damage, it's also a little awkward to calculate on the fly. As a result, it's the one thing in the V1 rules that, going by player feedback, is almost universally disliked by players. We've taken that feedback on board for V2, and will be changing model statlines to include a shiny, new Close Quarters Attacks (CQA) characteristic!
This entirely replaces the current formula - No more algebra in the middle of the game, you just look at the CQA stat, and roll that many dice! This does mean that large models no longer lose shots as they are wounded, but this will be accounted for elsewhere, with their ability to use multiple weapons being affected instead.
You can join in on the discussion of the new rules, and download a copy of the current draft rules for V2, in the development thread on the DakkaDakka forums here. You can also post any feedback in the Comm Guild Facebook group here.
If you haven't tried Maelstrom's Edge yet, and don't want to wait for V2, you can download the PDF version of the current Maelstrom's Edge rulebook from the website here!
In the current Maelstrom's Edge rules, unless you have a melee weapon with a specified SHO value, the number of dice you roll for Close Quarters attacks is determined by a neat little formula that uses the model's EVS, MAS and FOR stats. While this provides some nice granularity, and allows for a large model's CQ ability to be reduced as it takes damage, it's also a little awkward to calculate on the fly. As a result, it's the one thing in the V1 rules that, going by player feedback, is almost universally disliked by players. We've taken that feedback on board for V2, and will be changing model statlines to include a shiny, new Close Quarters Attacks (CQA) characteristic!
This entirely replaces the current formula - No more algebra in the middle of the game, you just look at the CQA stat, and roll that many dice! This does mean that large models no longer lose shots as they are wounded, but this will be accounted for elsewhere, with their ability to use multiple weapons being affected instead.
You can join in on the discussion of the new rules, and download a copy of the current draft rules for V2, in the development thread on the DakkaDakka forums here. You can also post any feedback in the Comm Guild Facebook group here.
If you haven't tried Maelstrom's Edge yet, and don't want to wait for V2, you can download the PDF version of the current Maelstrom's Edge rulebook from the website here!